Liquid and gas flow, anemometry and volumes



Daily, large quantities of liquids or gas are produced, shipped or distributed. A precise measurement of flow or volume is needed, be it for managing a process or a transaction. This can also be relevant to safety. With medical pumps that dispense highly efficient medicine into the body, for example, every drop counts.

Reliable measurement for meteorological observations, optimisation of ventilation systems or emission measurements require a calibrated instrument to measure air speed.

The laboratory develops, maintains and improves measurement facilities with the highest degree of accuracy, internationally recognised to verify, calibrate and perform type approvals for measurement instruments in the fields of liquid and gas flow, measurements of volumes and anemometry.

The laboratory’s quality system is based on the ISO/IEC 17025 standard and its certificates are internationally accepted and recognised.


Durchfluss_DL 1

The measurement services of the laboratory encompass calibrations, consulting, type approval and type testing. Feel free to contact us in case of questions.

Our calibration services ensure traceability to the national measurement standards. The laboratory’s quality system is based on the ISO/IEC 17025 standard and its certificates are internationally accepted and recognised.

Type of instrument

Measuring range



(0.02 … 13.0) m/s

(0.10 … 50.0) m/s

(0.10 + 0.5/v)%

0.02 m/s for v £ 1 m/s

2% for v > 1 m/s

Gas flow meters

(0.10 … 300) L/min (ambient air)

(0.10 … 4500) m3/h (ambient air)

(0.018 … 2500) m3/h (compressed air or gas, except H2 and He)




Water and heat flow meters


100 nL/min … 5 mL/min

(6.0 … 10'500) L/h, DN02 à DN50

(5.0 … 1600) m3/H, DN50 à DN300

(0.1 – 0.6)%

(0.05 – 0.15)%


Reference volumes

50 mL … 1000 L, demineralised water

5 L … N ´ 1000 L

(60 – 100) ppm



Type approval and type testing

We issue national type approval certificates for cold meters and perform the necessary tests for type testing according to the MID for flow (MI-001, MI-002 and MI-004). Please contact METAS Cert for further information on type testing.


Research & Development


We are continuously improving our installations and procedures to fulfil our customer’s needs, maintain low uncertainties and extend our measurement services. This Research and Development effort is conducted internally as well as within projects involving other national metrology institutes, technical universities or industrial partners.

Our current focus of research lies on:

• Development of a primary standard in liquid micro flow from 100 nL/min up to 1 mL/min

• Development standard reference materials for non-Newtonian liquids

Further information

to the top Last modification 01.02.2017


Federal Institute of Metrology
Laboratory Flow and Hydrometry
Lindenweg 50
CH-3003 Bern-Wabern
+41 58 387 01 11